Forrest WW10307125 Woodworker II 10-Inch, 30 Tooth, 5/8-Inch Arbor, 1/8-Inch Kerf Circular Saw Blade Review

Average Reviews:

(More customer reviews)You cannot go wrong with this blade.I now have 4 Forrest blades plus a dado set. This 30 tooth is used for ripping very thick hardwood.The 40 tooth is used to general purpose, I have 2 of these so I can have one waiting while the other is being sharpenned.I also have a 12 inch for my chop/miter saw for smooth cuts on molding and cross cutting. I always send all of them back to the factory for sharpenning.They come back like brand new within 10 days of sending them.Buy a Forrest blade and keep it for life.

Click Here to see more reviews about: Forrest WW10307125 Woodworker II 10 Inch, 30 Tooth, 5/8 Inch Arbor, 1/8 Inch Kerf Circular Saw Blade

Product Description:
This 10-inch Forrest circular saw blade offers a superior cut that leaves a rip-cut saw edge that's as smooth as if it had been sanded, and a cross-cut edge that's almost mark-free. This blade runs very quietly, and the backside tear-out in plywood is negligible. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and restraightened multiple times throughout the manufacturing process.
Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind its blades by offering a sharpening service that brings blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new.
The No-Melt carbide-tipped saw blade is especially designed for cutting single or multiple stacked sheets of plastic without chipping or melting these materials. No-Melt blades are particularly suitable for acrylics, delrins, ABS (Coycolac), styrenes, PVC, and both high and low-melt nylons. Specially engineered side clearances on the carbide teeth significantly reduce -- and in many cases, totally eliminate -- any formation of melted burrs of buildup of residue on cross-sawn sections of plastic materials. Made with double-hard and 40 percent stronger C4 carbide, so you can expect 50 to 300 percent longer life between sharpenings.