Ridgid R250AFA Angled Finish Nailer Review

Average Reviews:

(More customer reviews)This is my ultimate saw blade for everything I do in my very modest shop except oak ripping (burns the cut sides).For plywood ripping, you must keep the wood moving at least slowly or you might burn the sides of the cut also, because the edges of the teeth are very slightly beveled to create the polished effect.Plywood ripping is not nearly as fast as a regular blade.Nonetheless, your cut will be so fine that it is remarkable!

For oak cross-cut you must also not stall the cut (keep it moving) or else you might burn the edges, but the cut itself will appear polished.Fantastic for fine-finish mitering etc.Even if you don't use it as much as I do, I still would recommend it as part of your supply chain.

Click Here to see more reviews about: Ridgid R250AFA Angled Finish Nailer

Product Description:
Includes 2-1/2" Angled Finish Nailer - ZRR250AFA, 1,000 Nails, Eye Protection, Case, (2) Wrenches, (2) No-Mar Pads, Oil

Want to buy Ridgid R250AFA Angled Finish Nailer at other amazon sites? Click the corresponding icon below:

DELTA 35-7657 10" 40 Tooth General Purpose Circular Saw Blade Review

Average Reviews:

(More customer reviews)Yesterday, I was ripping some laminated 12/4 white oak using my 7657 blade.The cuts were jointer quality, with very little burning.I own a couple of Forrest WWII's, but the 7657 is the most on my saw. For less than half the price of a WWII, you get the same or better performance. With the 30 day satifaction guarentee, if you are unhappy with the blade, just return it for a full refund.

Click Here to see more reviews about: DELTA 35-7657 10 40 Tooth General Purpose Circular Saw Blade

Product Description:
Delta performance is now available in a blade. This 10-inch, 40-tooth model represents a new line of saw blades crafted with the latest technology and the highest standards in quality. Each blade is laser cut to be incredibly accurate and to eliminating warping. The C4 micro-grain carbide teeth are precision ground so that each tooth planes the wood for an exceptionally smooth finish. The laser-cut expansion slots minimize noise and edge vibration, and extra sharp cutting edges dramatically reduce splintering and tear-out.

Get 76% OFF

Want to buy DELTA 35-7657 10 40 Tooth General Purpose Circular Saw Blade at other amazon sites? Click the corresponding icon below:

Vermont American 26741 6-Inch Stacked Steel Dado with 5/8-Inch Arbor Review

Average Reviews:

(More customer reviews)I have owned this set for a number of years now and I have found it has quite a few shortcomings.First of all, the cuts produced by this set are a bit rough.The bottoms of the dado cuts are not as smooth as I would like and there is some tearout, especially if you are using the set on plywood.These blades also seemed to dull rather quickly (during normal use).There are a few paper shims included, but I rarely use these anymore since I basically only use this set for "rough" work now (building backyard stuff from treated lumber).

I recommend that you spend a bit more for a Freud dado set...

Click Here to see more reviews about: Vermont American 26741 6 Inch Stacked Steel Dado with 5/8 Inch Arbor

Product Description:
The Vermont American 26741 6-Inch Stacked Steel Dado cuts rabbets, splines, lap joints, dadoes, and others in all wood and wood products. It cuts widths from 1/8-to-13/16-inch. The set includes two 1/8-inch outside saws, four 1/8-inch chippers, and one 1/16-inch chipper. This product has a RPM max of 7000 and .107-inch plate thickness. The blade diameter is 6 inches, it has a 5/8-inch round arbor, and the hook angle is 10 degrees. The set is backed by a lifetime limited manufacturer's warranty.
What's in the Box
Two 1/8-inch outside saws, four 1/8-inch chippers, and one 1/16-inch chipper.

Get 37% OFF

Want to buy Vermont American 26741 6 Inch Stacked Steel Dado with 5/8 Inch Arbor at other amazon sites? Click the corresponding icon below:

Oshlun SBW-100060 10-Inch 60 Tooth ATB Finishing Saw Blade with 5/8-Inch Arbor Review

Average Reviews:

(More customer reviews)Oshlun makes the best saw blades I've ever used!!!
I use this 60 tooth on my miter saw and get super clean cuts in all kinds of wood! I have an Oshlun 50 tooth blade in my table saw for general cutting work and it handles everything just fine!! Even hen I cut plywood I don't get much chip out.

Click Here to see more reviews about: Oshlun SBW-100060 10 Inch 60 Tooth ATB Finishing Saw Blade with 5/8 Inch Arbor

Product Description:
OSHLUN smooth cut finishing saw blades are designed for the cleanest cross-cutting of all types of wood. particle board and plywood on miter, radial arm and table saws. 10" and larger saw blades have copper plugged expansion slots for quieter cutting. These blades use C-3 carbide.

Want to buy Oshlun SBW-100060 10 Inch 60 Tooth ATB Finishing Saw Blade with 5/8 Inch Arbor at other amazon sites? Click the corresponding icon below: