Porter Cable 1005824 10-Inch 24T General Purpose Stacked Dado Set Review

Average Reviews:

(More customer reviews)Product was sent promptly.It cuts very nicely and has enough weight to smooth out the spin in my old Sears 10" contractor table saw. The plastic caddy provides excellent protection for the blades and for me.This was a good value purchase.

Click Here to see more reviews about: Porter Cable 1005824 10 Inch 24T General Purpose Stacked Dado Set

Product Description:
These sets feature precision-sharpened, industrial-grade carbide tips for smooth, clean cutting and a dead-flat plate for straight, accurate cuts.Put them to work on wood and wood products, including softwood, hardwood, plywood, wood composites and melamine.Fit 5/8" arbors.10" dado includes blade caddy.

Want to buy Porter Cable 1005824 10 Inch 24T General Purpose Stacked Dado Set at other amazon sites? Click the corresponding icon below:

DELTA 35-7670 8-Inch Stacked Dado Set Review

Average Reviews:

(More customer reviews)The 7670 dado set replaced a very good Freud SD208. The 7670 set has (6) 4-tooth chippers as opposed to the Freud's (5) 2-tooth chippers. The 7670 also has 24 tooth outside cutters....twice what the SD208 had. The result of the extra teeth is a smoother bottom on dados and rabbets. The SD208 left minor striping marks on the bottom...it's a small issue, but is nice not to have the marks at all. It also seems to make cleaner cuts along the edges.

The shim stock and carrying case are much nicer on the 7670, however the its teeth have smaller carbide than the Freud, and the chippers aren't as massive. Because the chippers are lighter weight due to the lack of any anti-kicback features, the 7670 comes up to speed faster, and allows deeper cuts with less bogging down on my saw....an added benefit I had not expected. Other than being made in China, I have no big issues with the set and am happy that I upgraded. It's design is more similar to dado sets costing over $200. I've been quite happy with the overall performance and especially the great value.

Since Black & Decker purchased Delta well over a year ago, this set is now available under both the DeWalt and Delta logos, which should make it easier to find.

Click Here to see more reviews about: DELTA 35-7670 8 Inch Stacked Dado Set

Product Description:
The DELTA 35-7670 8-inch Stacked Dado Set includes two 8-inch dado blades made to DELTA's exacting standards. DELTA uses a laser cutting technique to ensure that each blade is accurately cut without any warping. You'll have exceptionally smooth cuts, and fewer splintering and tear-outs, thanks to the extremely sharp cutting edges with C4 micro-grain carbide teeth that are ground so that each tooth planes the wood. The expansion slots are precisely cut to minimize noise and edge vibration. Also included are 4-tooth carbide tipped chippers to deliver flat bottom cuts, as well as stainless steel shims for making ultra-fine width adjustments. Included with the set is a storage case that protects the blades against damage.

Get 66% OFF

Want to buy DELTA 35-7670 8 Inch Stacked Dado Set at other amazon sites? Click the corresponding icon below:

DEWALT DW713 Heavy-Duty 10-Inch Compound Miter Saw Review

Average Reviews:

(More customer reviews)Bought the saw in Jan-08 and have been using it for a major moulding project.I've borrowed a Craftsman "Professional" compound miter saw in the past and learned what I would look for if I ever purchased this type of saw.When you buy this saw, I feel you get higher quality things you need, not a feature laden saw with mediocre components.You'll appreciate the tall fence, the blade guard, a dust bag that actually catches sawdust, a high quality miter table/gauge without stickers, a 15 amp motor, and a stout and sturdy frame.The miter lock is so much nicer than a screw type, and the detent override comes in handy for those angles close but not quite at the standard angles.

The saw I used in the past would collect sawdust between the swiveling miter table and the miter gauge, eventually making it difficult to adjust your angle, eventually forcing you to take the table apart for cleaning.I'm very impressed by how smoothly this table adjusts from side to side.

For trim work, I have found you just don't need to buy a saw with lasers and clamps and whatever else.Just buy the right saw the first time, a sturdy one like the DW713.

Click Here to see more reviews about: DEWALT DW713 Heavy-Duty 10 Inch Compound Miter Saw

Product Description:
The DeWalt DW713 Heavy-Duty 10-inch Compound Miter Saw comes with a powerful 15 Amp motor capable of 5,000 RPM for extended power and durability. With bevels at three to 48 degrees for increased cut capacity, this saw comes with a machined base fence support that maintains fence alignment for accurate cuts. An adjustable stainless steel detent plate with 11 positive stops is also included for repeatable accuracy and work site durability. This saw cuts 3-1/2-inch crown nested vertically for increased vertical cutting capacity and cuts 3-1/4-inch base vertically for increased vertical cutting capacity. Also featured is a 0-to-50-degree left and right miter capacity for added versatility in miter cutting. Its miter cam lock system provides increased ease of use and quick and accurate miter table positioning, and a horizontal main handle provides increased comfort during use.
This saw also comes with a tall sliding fence that support crown molding vertically and easily slides out of the way for bevel cuts. Its arbor size is 5/8 inches. The DW713 weighs 35 pounds and is compatible with the DW7187 adjustable laser system. This saw comes with a built-in carrying handle for increased portability.

Get 47% OFF

Want to buy DEWALT DW713 Heavy-Duty 10 Inch Compound Miter Saw at other amazon sites? Click the corresponding icon below:

KwikTool USA BBS450 Bad Blade System with Patented Guard and C7 4.5-Inch Bad Blade for almost any 4.5-Inch angle grinder Review

Average Reviews:

(More customer reviews)Who would of thought? That I could use my angle grinder to cut through deck boards with nails in them and then get underneath and cut the metal joist hangers and the joists all in one motoin with one tool..... my own angle grinder. Yep you heard correct I used this thing will cut metals, woods,fiberglass,and multiple layers of stuff with this one blade its amazing but equally efficent and fast. Once mounted (unit goes over your factroy angle grinder guard and is tricky to mount first time but did it on second try). I was able to blast thru wood with ease and absoulty no kick back in fact I tried to make the blade do it and still nothing. The cuts are smooth and have used it for laminate flooring. I bought the 6 pc kit with carver blade and use it for my log furniture making and it is so fast and clean it needed almost no sanding after. So much safer and faster than my old lancelot carver made from a chain saw blade.One thing to remember is these are carbide blades and we all know that carbide is brittle, I found out the hard way that if my work wasnt clamped or secured when cutting metal it stared to vibrate and I knocked off some teeth. Good instructions and pictures for assembly. Will post some pictues of the stuff I cut and made.

Click Here to see more reviews about: KwikTool USA BBS450 Bad Blade System with Patented Guard and C7 4.5 Inch Bad Blade for almost any 4.5 Inch angle grinder

Want to buy KwikTool USA BBS450 Bad Blade System with Patented Guard and C7 4.5 Inch Bad Blade for almost any 4.5 Inch angle grinder at other amazon sites? Click the corresponding icon below:

Hitachi C10FCH2 10-Inch Miter Saw with Laser Review

Average Reviews:

(More customer reviews)While I am not new to power tools (I am an avid DIY'r, and HVAC tech).This was my first purchase of a powered compound miter saw.I had no problems with the manual that came with it, besides who really reads those?The unit for the most part is self explanitory.I had it mounted to my bench downstairs in about 20 mins, plus 15 mins to go to the hardware store for some lag bolts.Operation and adjustments were easy.Cuts like a dream.The only thing i can say bad about it, isnt really bad.I would have liked to be able to cut 8" baseboard with it but it doesnt have the capacity.I should have done more research prior.But for all my other uses, crown moulding, quarter-round, trimming out a window, I had fun and they look great.I would recomend this saw for those who arent looking to spend an arm and a leg.Plus as an added bonus, it's super light for mobility.

Click Here to see more reviews about: Hitachi C10FCH2 10 Inch Miter Saw with Laser

Product Description:
The Hitachi C10FCH2 10-Inch Compound Miter Saw with Laser Marker provides smooth, accurate miters and crosscuts in a variety of workpieces, including wood, plywood, decorative panels, soft fiberboard, hard board, and aluminum sashes. Its flexible miter angles and compound cutting capability provide versatility on the job. An ideal tool for trim carpenters, framers, and woodworkers who demand precision and reliability, the C10FCH2 features Hitachi's exclusive Laser Marker System for exact alignment and predictable blade location.

C10FCH2 Compound Miter Saw
Tool SpecificationsBlade Diameter10"Amps15No-Load Speed5,000Miter Angle Range0°-52° L & RBevel Angle Range0°-45° LeftWeight26.5 lbs


Positive miter stops let you select preset points at specific angles. View larger.

Adjust the bevel up to 45 degrees to the left for precision cuts. View larger.

Dust collector keeps saw's interior components dirt-free.Compound Feature for Precise Miters and Bevels
Hitachi designed the C10FCH2 for versatile, easy use. The thumb-actuated positive miter stops allow for simple miter adjustments between zero and 52 degrees. This design allows you to easily change the angle of the cutting blade for creating miters in crown molding and other trim pieces. And with a bevel range of 45 degrees to the left, the Hitachi C10FCH2 provides gorgeous bevels on the first try.
The 10-1/2-inch TCT saw blade (included) makes easy work of delicate trim and other woodwork, and the large extended flip fence raises to four inches to allow for accurate cutting of large workpieces up to 2-5/16 inches high and 5-21/32 inches deep.
Laser Marker Technology for Perfect Cuts Everytime
Hitachi equipped the C10FCH2 with its exclusive Laser Marker System, which can be activated before the blade is in motion for exact alignment and predictable blade placement. Simply line up the laser with your mark on the workpiece, and the saw blade will make an exact cut along the laser guide. As long as your measurements are right, your cuts will be, too!
Chock-Full of User-Friendly Features
The C10FCH2 has plenty of features to help you make the perfect cut the first time. To start, a 15-amp motor generates a no-load speed of up to 5,000 RPM for making crosscuts and miters with ease, even on the toughest cutting jobs.
For ease of use, a comfortable horizontal handle with a vibration-reducing elastomer grip keeps you in control at all times, a large table provides a stable guide and sturdy support, and a built-in clamping system holds your workpiece in place.
The C10FCH2 also includes a dust collector that minimizes accumulation of dust and particles in your both your workspace and the saw's interior components, keeping your jobsite clean and prolonging the life of the tool. An added bonus, easily accessible carbon brushes will help your saw perform for the long term.
Weighing just 26.5 pounds, the C10FCH2 is the lightest tool in its class, making it the most portable 10-inch compound miter saw with laser marker on the market.
Durably built, this tool is backed with an industry-leading five-year warranty. It is compatible with the UU610 Miter Saw Stand from Hitachi.
About Hitachi: A Tradition of Innovation
Hitachi Power Tools (Hitachi Koki USA, Ltd.) provides professional-grade power tools for a variety of applications, including woodwork, metalwork, concrete, drilling, cutting, and fastening. Hitachi is a leader in power tool research and development and has achieved many firsts in the power tool industry, including creating the first-ever sliding compound miter saw to combine the capacity of a radial arm saw and the convenience of a miter saw. Today, Hitachi continues the tradition of innovation and engineering with new features in addition to classic quality.

What's in the Box
C10FCH2 Compound Miter Saw with Laser Marker System, 10-inch TCT Saw Blade, extended fence, dust bag, vise assembly, box wrench, and hex bar wrench.


Make precise cuts with the exclusive Laser Marker System.

Get 53% OFF

Want to buy Hitachi C10FCH2 10 Inch Miter Saw with Laser at other amazon sites? Click the corresponding icon below:

Stanley Bostitch Quick-Change Utility Knife with Retractable Blade and Twine Cutter, Silver (10-499) Review

Average Reviews:

(More customer reviews)Great design by Stanley so you don't have to take it apart to change blades.The little storage area for blades is neat too.
The blade change isn't totally intuitive so it would help if they put something like this on their packaging: "Push down black retractable blade button and push all the way forward past the detent so the button stays pushed down.Then push in the silver side button and pull blade out."
Only reason I gave it 4 stars is that I used it to cut some ceiling tile and rubbed off a big section of paint on the handle near the blade; they should have nickel or chrome plated that section instead of painting it.

Click Here to see more reviews about: Stanley Bostitch Quick-Change Utility Knife with Retractable Blade and Twine Cutter, Silver (10-499)

Product Description:
The Stanley 6-Inch Quick Change Retractable Utility Knife starts sharper and stays sharper than standard heavy-duty blades. This knife allows blades to be changed quickly, with no screwdriver required. Blade features include a three-position retractable blade slide, a swing-out blade storage magazine, and an integrated string cutter that can be used even when retracted. This utility knife includes three blades and comes with Stanley's limited lifetime warranty.
Everyone knows the importance of the right tool for the job. Stanley's "Application Specific Blades" are designed with unique features for cutting drywall, roofing shingles and paper. Each blade is constructed of carbon alloy steel. With Stanley's patented S3 Technology, paper blades start sharper and stay sharper, roofing blades are stronger, and drywall and paper blades deliver more cuts per blade. The entire line provides better performance than standard heavy duty blades. View the comparison chart to choose the Stanley blade that is right for you.

Want to buy Stanley Bostitch Quick-Change Utility Knife with Retractable Blade and Twine Cutter, Silver (10-499) at other amazon sites? Click the corresponding icon below:

Bora 540903 3 Piece Clamp Edge Set Review

Average Reviews:

(More customer reviews)2 of the 3 clamps arrived broken during shipping.They were not wrapped very good and the end of the largest one was sticking out of the box.So I sent them back for a refund.

Click Here to see more reviews about: Bora 540903 3 Piece Clamp Edge Set

Product Description:
BORA Clamp-N-Cut edge guides are ideal for all types of woodworking, cabinet making and DIY applications.Large, over-sized clamping handle allows for increased clamping pressure.Soft-grip rubberized clamping pad insures your work material is held firmly in place without fear of marring.Clamping edge guides feature an aircraft grade extruded aluminum body for straight accurate cuts and rigid clamping.Exclusive swivel head design allows Clamp-N-Cut edge guide to firmly clamp angles up to 22-1/2 degrees for flexibility in many clamping and cutting applications.Each unit includes integrated hanging loop for convenient storage.Size denotes maximum clamping capacity.

Get 22% OFF

Want to buy Bora 540903 3 Piece Clamp Edge Set at other amazon sites? Click the corresponding icon below: