Ridgid R250AFA Angled Finish Nailer Review

Average Reviews:

(More customer reviews)This is my ultimate saw blade for everything I do in my very modest shop except oak ripping (burns the cut sides).For plywood ripping, you must keep the wood moving at least slowly or you might burn the sides of the cut also, because the edges of the teeth are very slightly beveled to create the polished effect.Plywood ripping is not nearly as fast as a regular blade.Nonetheless, your cut will be so fine that it is remarkable!

For oak cross-cut you must also not stall the cut (keep it moving) or else you might burn the edges, but the cut itself will appear polished.Fantastic for fine-finish mitering etc.Even if you don't use it as much as I do, I still would recommend it as part of your supply chain.

Click Here to see more reviews about: Ridgid R250AFA Angled Finish Nailer

Product Description:
Includes 2-1/2" Angled Finish Nailer - ZRR250AFA, 1,000 Nails, Eye Protection, Case, (2) Wrenches, (2) No-Mar Pads, Oil

Want to buy Ridgid R250AFA Angled Finish Nailer at other amazon sites? Click the corresponding icon below:

Tenryu GM-25540 10" Carbide Tipped Saw Blade ( 40 Tooth ATB Grind - 5/8" Arbor - 0.111 Kerf) Review

Average Reviews:

(More customer reviews)This is a top shelf blade that's very comparable in design and performance to the industry standard of the Forrest WWII 40T.Like any high end general purpose blade, it offers versatile performance with a nice compromise of glueline ripping ability, clean crosscuts, and good performance in sheet goods.Also, like any good general purpose blade, when compared to a pure dedicated ripping blade it tends to bog and burn a bit in very thick dense woods, and leaves a bit of tearout on crosscuts and sheetgoods when compared to a good 80T crosscut blade, but counters those weaknesses with the ability to perform well enough in a variety of materials and cuts that you can use one blade for the vast majority of tasks.

It's worth noting that the kerf width is 0.111", which is thicker than a standard 3/32" (0.098") thin kerf, and thinner than a standard 1/8" (0.125") full kerf.In use, this means that it takes a wider cut than a TK requiring slightly more power, which influences how it performs in thick materials.Inversely, it takes a narrower cut than a full kerf blade which allows to cut through thick material more easily.Competitors such as the Forrest WWII, Infinity Combomax, and Ridge Carbide TS2000 are available in a choice of thin kerf or full kerf, so you can choose which is best suited for you saw and usage.It's also worth noting that this blade is manufactured in Asia, whereas the Forrest and Ridge Carbide are made in the USA.

Click Here to see more reviews about: Tenryu GM-25540 10 Carbide Tipped Saw Blade ( 40 Tooth ATB Grind - 5/8 Arbor - 0.111 Kerf)

Product Description:
This is the top of the line choice for the serious craftsman who wants one superior blade for most all woodworking.Saw plate run-out less than .002" for flat true run. Built-in dampening system reduces vibration, making cuts quieter and more precise. Performs smooth, easy crosscuts and rips. Even does a great job on double sided laminates.Carbide tip material is an extra hard, C-4 and super fine grain with corrosion inhibitors to give the keenest edge and longest sharp-life.

Get 30% OFF

Want to buy Tenryu GM-25540 10 Carbide Tipped Saw Blade ( 40 Tooth ATB Grind - 5/8 Arbor - 0.111 Kerf) at other amazon sites? Click the corresponding icon below:

Freud LU88R009 9-Inch 54 Tooth ATB Thin Kerf Crosscutting and Ripping Saw Blade with 5/8-Inch Arbor and PermaShield Coating Review

Average Reviews:

(More customer reviews)We have an OLD dewalt radial arm saw that is underpowered.We read that this blade is specifically designed for underpowered saws.It is thinner and has a narrower kerf which means it has less wood to remove to make a cut.We read about this in a magazine that gave it a thumbs up, and we concur.It exceeded our expectations.We were cutting walnut and Brazilian Teak (aka cumaru), which is second on the wood hardness scale at our local flooring company.I expected burning and hesitation/choking on the part of the saw.It cut beautifully despite the difficult wood.No burning at all, no hesitation on the part of the saw.I will continue to get this blade and in fact am looking for one for my chop saw.

Click Here to see more reviews about: Freud LU88R009 9 Inch 54 Tooth ATB Thin Kerf Crosscutting and Ripping Saw Blade with 5/8 Inch Arbor and PermaShield Coating

Product Description:
This Perma-SHIELD coated blade gives new life to underpowered saws and produces smooth crosscuts in hardwoods, softwoods and mouldings.blades pull 1/3 less on the saw, which translates into 38% more cutting power.kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results.Application:Crosscutting Blades For Fine Finish With Underpowered Saws

Get 39% OFF

Want to buy Freud LU88R009 9 Inch 54 Tooth ATB Thin Kerf Crosscutting and Ripping Saw Blade with 5/8 Inch Arbor and PermaShield Coating at other amazon sites? Click the corresponding icon below:

Forrest STIF06 6-Inch Saw Blade Dampener and Stiffener with 5/8-Inch Arbor Review

Average Reviews:

(More customer reviews)After purchasing the Grizzly 1023S table saw and a Forrest WWII blade, I was expecting glass-smooth cuts.Unfortunately, I was a little disappointed in that I could still see the blade marks on the wood.So I decided, based on reviews for the 5" model, to purchase this stiffener...and what a difference!Now, my saw makes glass-smooth cuts and I have no need for any further working of the cut edge.I did not notice any difference in noise, as reported by other reviewers, but my saw was pretty quiet to begin with.This was well worth the money.

Click Here to see more reviews about: Forrest STIF06 6 Inch Saw Blade Dampener and Stiffener with 5/8 Inch Arbor

Get 6% OFF

Want to buy Forrest STIF06 6 Inch Saw Blade Dampener and Stiffener with 5/8 Inch Arbor at other amazon sites? Click the corresponding icon below:

Porter Cable 1007740 10-Inch 40T Carbide Saw Blade Smooth Cut Combination Review

Average Reviews:

(More customer reviews)I have purchased a couple of these blades and for the price, I was extremely surprised.The crosscut of this blade rivals a lot of the more expensive blades.I have run Forrest and Freud blades and while the Woodworker II does provide a little better cut, it is also over twice the price.........without a supplied stiffener.And look at the bright side, a good stiffener will cost you at least $20.00, and you can reuse these on any saw blade you buy in the future.
The carbide is heavy enough to survive a few sharpenings, the blade holds its edge very good, and you can (with a properly tuned fence) rip a glue line joint without any jointing.
This item is definitely worth the money in comparison to some of the others on the market.

Click Here to see more reviews about: Porter Cable 1007740 10 Inch 40T Carbide Saw Blade Smooth Cut Combination

Product Description:
Pro Series. Designed for specific types of saws and applications. Special recipe tungsten micrograin carbide provides excellent impact resistance while allowing keen, extremely sharp cutting edges.

Get 73% OFF

Want to buy Porter Cable 1007740 10 Inch 40T Carbide Saw Blade Smooth Cut Combination at other amazon sites? Click the corresponding icon below:

Freud D1040X Diablo 10-Inch 40-Tooth ATB General Purpose Saw Blade with 5/8-Inch Arbor and PermaShield Coating Review

Average Reviews:

(More customer reviews)Good blade for the price.Used in a 10" Rigid contractor's table saw, produces smooth rips and crosscuts in poplar, pine, MDF, and red oak with minimal tear out.Definitely cleaner than OEM Rigid blade, closs to Freud/Rigid topline blades if you don't force the cut and take your time.Would definitely buy again.

Click Here to see more reviews about: Freud D1040X Diablo 10 Inch 40-Tooth ATB General Purpose Saw Blade with 5/8 Inch Arbor and PermaShield Coating

Product Description:
For a highly versatile blade that makes clean cuts in a broad variety of wood types, look no further than the Freud D1040X Diablo 10-Inch General Purpose Saw Blade. This is your go-to blade for slicing through oak, pine, plywood, pressure-treated lumber, and beams. Ideal for a wide variety of applications, this blade reduces the need to change blades between tasks. For strong, long-lasting resistance, the blade features a tough steel plate and high-density carbide tips.



Model #D1040XDiameter10"Machine UseMiter Saw, Table SawApplicationGeneral PurposeTeeth40 ATB
(Alternate-Top Bevel)Arbor5/8"Kerf.098"Hook Angle15°Makes Clean Cuts in a Wide Variety of Wood
Achieving premium results when performing any kind of woodworking is all about clean, accurate cuts. The Freud D1040X makes this process easy, fast, and precise. An added time-saving feature, its general-purpose versatility will let you employ it job after job. This blade is even suited to making rip cuts, often achieving a smoother finish than dedicated ripping blades.
Contractors, construction workers, and avid do-it-yourselfers will want to keep this blade on hand for varying jobs that call for making rips and crosscuts in both hardwoods and softwoods. Appropriate application materials include oak, pine, plywood, pressure-treated lumber, and beams.
Produces Smooth, Quiet Cuts with Laser-Cut Kerf
The Freud D1040X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade's 40 ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.
An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life.
Features Shock-Resistant Carbide for Long-Lasting Precision
So you can count on it over the long term, the Freud D1040X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.
Fits Miter and Table Saws
The Freud D1040X is a great addition to your workshop because it's designed with the versatility to fit a variety of table and miter saws, including sliding miter saws.
This product is covered by Freud's Limited Lifetime Warranty.
What's in the Box
Freud D1040X Diablo 10-Inch General Purpose Saw Blade.

Get 35% OFF

Want to buy Freud D1040X Diablo 10 Inch 40-Tooth ATB General Purpose Saw Blade with 5/8 Inch Arbor and PermaShield Coating at other amazon sites? Click the corresponding icon below:

Ridgid R1050C 21058 10-Inch by 50T Combination Saw Blade Review

Average Reviews:

(More customer reviews)I've used this blade for a while now and love it.Even had a master trim carpenter use my TS and his only unsolicited comment was, "That's a nice blade you have in your saw", 'nuff said.
John Gray

Click Here to see more reviews about: Ridgid R1050C 21058 10 Inch by 50T Combination Saw Blade

Get 26% OFF

Want to buy Ridgid R1050C 21058 10 Inch by 50T Combination Saw Blade at other amazon sites? Click the corresponding icon below: