Freud LU88R009 9-Inch 54 Tooth ATB Thin Kerf Crosscutting and Ripping Saw Blade with 5/8-Inch Arbor and PermaShield Coating Review

Average Reviews:

(More customer reviews)We have an OLD dewalt radial arm saw that is underpowered.We read that this blade is specifically designed for underpowered saws.It is thinner and has a narrower kerf which means it has less wood to remove to make a cut.We read about this in a magazine that gave it a thumbs up, and we concur.It exceeded our expectations.We were cutting walnut and Brazilian Teak (aka cumaru), which is second on the wood hardness scale at our local flooring company.I expected burning and hesitation/choking on the part of the saw.It cut beautifully despite the difficult wood.No burning at all, no hesitation on the part of the saw.I will continue to get this blade and in fact am looking for one for my chop saw.

Click Here to see more reviews about: Freud LU88R009 9 Inch 54 Tooth ATB Thin Kerf Crosscutting and Ripping Saw Blade with 5/8 Inch Arbor and PermaShield Coating

Product Description:
This Perma-SHIELD coated blade gives new life to underpowered saws and produces smooth crosscuts in hardwoods, softwoods and mouldings.blades pull 1/3 less on the saw, which translates into 38% more cutting power.kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results.Application:Crosscutting Blades For Fine Finish With Underpowered Saws

Get 39% OFF

Want to buy Freud LU88R009 9 Inch 54 Tooth ATB Thin Kerf Crosscutting and Ripping Saw Blade with 5/8 Inch Arbor and PermaShield Coating at other amazon sites? Click the corresponding icon below:

Freud D1040X Diablo 10-Inch 40-Tooth ATB General Purpose Saw Blade with 5/8-Inch Arbor and PermaShield Coating Review

Average Reviews:

(More customer reviews)Good blade for the price.Used in a 10" Rigid contractor's table saw, produces smooth rips and crosscuts in poplar, pine, MDF, and red oak with minimal tear out.Definitely cleaner than OEM Rigid blade, closs to Freud/Rigid topline blades if you don't force the cut and take your time.Would definitely buy again.

Click Here to see more reviews about: Freud D1040X Diablo 10 Inch 40-Tooth ATB General Purpose Saw Blade with 5/8 Inch Arbor and PermaShield Coating

Product Description:
For a highly versatile blade that makes clean cuts in a broad variety of wood types, look no further than the Freud D1040X Diablo 10-Inch General Purpose Saw Blade. This is your go-to blade for slicing through oak, pine, plywood, pressure-treated lumber, and beams. Ideal for a wide variety of applications, this blade reduces the need to change blades between tasks. For strong, long-lasting resistance, the blade features a tough steel plate and high-density carbide tips.



Model #D1040XDiameter10"Machine UseMiter Saw, Table SawApplicationGeneral PurposeTeeth40 ATB
(Alternate-Top Bevel)Arbor5/8"Kerf.098"Hook Angle15°Makes Clean Cuts in a Wide Variety of Wood
Achieving premium results when performing any kind of woodworking is all about clean, accurate cuts. The Freud D1040X makes this process easy, fast, and precise. An added time-saving feature, its general-purpose versatility will let you employ it job after job. This blade is even suited to making rip cuts, often achieving a smoother finish than dedicated ripping blades.
Contractors, construction workers, and avid do-it-yourselfers will want to keep this blade on hand for varying jobs that call for making rips and crosscuts in both hardwoods and softwoods. Appropriate application materials include oak, pine, plywood, pressure-treated lumber, and beams.
Produces Smooth, Quiet Cuts with Laser-Cut Kerf
The Freud D1040X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade's 40 ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.
An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life.
Features Shock-Resistant Carbide for Long-Lasting Precision
So you can count on it over the long term, the Freud D1040X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.
Fits Miter and Table Saws
The Freud D1040X is a great addition to your workshop because it's designed with the versatility to fit a variety of table and miter saws, including sliding miter saws.
This product is covered by Freud's Limited Lifetime Warranty.
What's in the Box
Freud D1040X Diablo 10-Inch General Purpose Saw Blade.

Get 35% OFF

Want to buy Freud D1040X Diablo 10 Inch 40-Tooth ATB General Purpose Saw Blade with 5/8 Inch Arbor and PermaShield Coating at other amazon sites? Click the corresponding icon below:

MK Morse CSM65040SC Metal Devil 6-1/2" Steel Cutting Circular Saw Blade Review

Average Reviews:

(More customer reviews)I bought this blade for my milwaukee v28 metal cutting saw.The first couple of cuts on 1/8" metal were real nice, no sparks, just metal files that dropped to the ground.After a few more cuts, the blade starting making sparks as it cut, which it isn't supposed to do, as it's a "cold cut" blade.These sparks have made the transparent plastic on the saw almost impossible to see through.Now whenever I cut with this blade, I just get a lot of sparks, which I was trying to avoid by not going the abrasive blade route.Needless to say, I'm dissapointed in this blade. For $40, you expect more than just a handful of quality cuts on 1/8" mild steel.

Click Here to see more reviews about: MK Morse CSM65040SC Metal Devil 6-1/2 Steel Cutting Circular Saw Blade

Product Description:
The Morse Metal Devil cuts through tough metals quickly and smoothly due to it's unique combination of manufacturing quality, metallurgy and blade configuration.

Get 56% OFF

Want to buy MK Morse CSM65040SC Metal Devil 6-1/2 Steel Cutting Circular Saw Blade at other amazon sites? Click the corresponding icon below:

Forrest WW12307125 Woodworker II 12-Inch 30 Tooth 1-Inch Arbor 1/8-Inch Kerf Circular Saw Blade Review

Average Reviews:

(More customer reviews)YOU CAN CUT ABSOLUTELY ANYTHING WITH THIS BLADE BECAUSE OF THE THICKER AND HEAVIER PLATE. WE ONLY USE NEGATIVE HOOKS FOR A STRAIGHTER AND CLEANER CUT. OUTLASTS OTHER'S 3 TO 1 !!!!!! NO WEEBLE WOBBLE WITH THIS BEAUTY.

Click Here to see more reviews about: Forrest WW12307125 Woodworker II 12 Inch 30 Tooth 1 Inch Arbor 1/8 Inch Kerf Circular Saw Blade

Get 16% OFF

Want to buy Forrest WW12307125 Woodworker II 12 Inch 30 Tooth 1 Inch Arbor 1/8 Inch Kerf Circular Saw Blade at other amazon sites? Click the corresponding icon below:

Freud SC-001 3-1/2-Inch Blade Stabilizer with 5/8-Inch Arbor for 7-Inch Saws or Larger Review

Average Reviews:

(More customer reviews)When I first got my Freud stabilizers I used them on both sides of my blade, and my cuts improved. Then I read an article by the owner of a prominent U.S. saw blade manufacturing firm. In this article, the author recommends using a stabilizer on only the outside of your blade (the side with the nut). I made this change, and my cuts improved even more. I highly recommend the Freud stabilizer. It is very solid, and very nicely machined. It has more mass than other stabilizers on the market. I suspect that this helps increase both the flywheel effect and the gyroscopic effect over the thinner, lighter stabilizers. Just be sure to get rid of all sawdust on your saw arbor, your blade, and the stabilizers -- or stabilizer if you use only one -- before mounting your blade. This will help ensure the least possible run-out and the smoothest cuts. Experiment a little like I did to find the best number of stabilizers to use with each blade, but do use a stabilizer. You will get less vibration, and therefore smoother cuts.

Click Here to see more reviews about: Freud SC-001 3-1/2 Inch Blade Stabilizer with 5/8 Inch Arbor for 7 Inch Saws or Larger

Product Description:

Use this stabilizer with saw blades that have a diameter of 7 inches or greater, and a 5/8-inch arbor.
The Freud Difference
Freud manufactures some of the most innovative, technologically advanced saw blades in the world. To ensure that the highest quality products meet the toughest design standards, Freud owns and operates six manufacturing facilities in Western Europe. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain carbide with titanium, called TiCo -- a combination of titanium and cobalt. Freud develops different types of carbide for each application to maximize the cutting life and performance of the tool; and Freud also operates one of the most modern product development research centers in Europe. By overseeing the entire manufacturing process from start to finish, Freud guarantees some of the highest quality, most advanced products in the industry.
About this Blade Stabilizer
When making a high precision cut, any amount of rim vibration can mean the difference between a masterpiece and scrap. This Freud saw blade stabilizer is precision machined and balanced to give an added amount of stability, which not only improves the cut, but also makes the saw cut quieter -- and extends its cutting life between sharpenings. This stabilizer can be used on blades with a 7-inch diameter and larger, with a 5/8-inch arbor. Stabilizers should only be used on stationary saws and should never be used on hand held portable saws. A saw blade is not included with this stabilizer.
Applications
Use this stabilizer to minimize rim vibration and improve the cut of your stationary saw. It also makes the saw cut quieter, and prolongs the saw blade's life between sharpenings.
Key Tech Specs:

For use with saws 7-inches or larger, 5/8-inch arbor
Not for use on hand-held portable saws
Precision machined and balanced

Warranty
This stabilizer is covered by Freud's limited lifetime warranty.

Get 78% OFF

Want to buy Freud SC-001 3-1/2 Inch Blade Stabilizer with 5/8 Inch Arbor for 7 Inch Saws or Larger at other amazon sites? Click the corresponding icon below:

CMT 219.090.12 12-Inch x 90-Tooth, .118 Kerf, 1-Inch Bore Miter & Radial Arm Circular Saw Blade Review

Average Reviews:

(More customer reviews)I work in the finish world and do 99% of it in the field. often using prefinished stock and mostly hard wood. From first cut this blade lets you know you got your moneys worth. Don,t force the cut let the blade do all the work. You'll get polished end grain and no tearout.

Click Here to see more reviews about: CMT 219.090.12 12 Inch x 90-Tooth, .118 Kerf, 1 Inch Bore Miter and Radial Arm Circular Saw Blade

Product Description:
Miter and radial arm saws offer you a wide range of uses, so CMT gives you a compound blade designed to meet their specifications. - the -5° hook angle, thin kerf and high tooth count allow you to make splinter-resistant top and bottom cuts in plywood, hardwoods, softwoods and laminates. - the negative hook keeps the blade from climbing at aggressive feed rates. With these features, CMT blades offer super performance on radial arm and miter saws and guarantee you a safer, more efficient working environment.

Want to buy CMT 219.090.12 12 Inch x 90-Tooth, .118 Kerf, 1 Inch Bore Miter and Radial Arm Circular Saw Blade at other amazon sites? Click the corresponding icon below:

Freud TK807 Avanti 12-Inch 96-Tooth ATB 1-Inch Arbor Ultra-Fine Finish Crosscut Blade Review

Average Reviews:

(More customer reviews)I have been doing finish carpentry and trim over 15 years and the Avanti blades are without a doubt the best trim blades I have found. The 7 1/4" will cut finish plywood usind a circular saw with no tear out at all.

Click Here to see more reviews about: Freud TK807 Avanti 12 Inch 96-Tooth ATB 1 Inch Arbor Ultra-Fine Finish Crosscut Blade

Product Description:
Features Freud's Tico High Density Carbide is the perfect mixture of cobalt, tungsten, and titanium designed to maximize cutting life. This thin kerf design was specifically created for table saws, miter boxes, and radial arm saws.

Get 46% OFF

Want to buy Freud TK807 Avanti 12 Inch 96-Tooth ATB 1 Inch Arbor Ultra-Fine Finish Crosscut Blade at other amazon sites? Click the corresponding icon below: